Basic knowledge of your home’s plumbing system is essential, however you don’t have to know about the very complex aspects, especially if you have zero knowledge of it. Understanding the basics should be enough for you to perform simple maintenance and repairs if one of the pipes encounters problems. You can look for reputable plumbers near me that you can call as well, should you require professional assistance with your plumbing system. Here’s is a look at how a plumbing system works.
Water supply and drainage system
The drainage and water supply are two separate subsystems in any plumbing system; they do not overlap each other. There are fixtures or connections between the drainage and water supply and these fixtures take the air in from the vent stack, allowing the sealed vent pipes to prevent sewer gases from escaping and going back up the drains. We all know that sewer gases are highly flammable, so if there is a problem with the vent pipes the gases will escape them and hang in the air, making it hazardous to fire.
Water that flows through the pipes are under pressure
The water needs just the right pressure to supply all the tubes. This pressure also allows the water to travel upstairs, wherever there are faucets. If there is not enough water pressure, you will not have water in the upper storeys of your house.
Water passes through a metre
This metre is what computes your water consumption. You can find a stop valve near the metre. This stop valve is essential in emergencies where you need to shut off your water supply. The metre translates the water that passes through it into your consumption that you have to pay for.
Hot and cold water supply
The water supply is ready to provide you with cold water, but hot water however needs to pass through another system to get hot. The pipes carry the water from the water supply to the water heater, in which then the heater heats it before it releases through a faucet or a showerhead. There is a hot water line that provides water to all fixtures that need it.
Drainage system does not need pressure
All pipes in a drainage system have a downward angle; hence it does not require pressure to drain water from the pipes into the sewer system. Gravity is what works in a drainage system. A septic tank is where the wastewater stays and there are vents and traps in a sewer system which you can find on the roof of your home, where the air comes into the pipes and drains to push down wastewater down the drain. Otherwise, you will need to get the wastewater syphoned out.
If there are any issues with your plumbing system, it is best to consult a professional plumber so they can give you the right solutions that are long-lasting. Band-aid solutions are suitable for emergencies, but you still have to get a plumber to your home to provide an efficient and lasting solution that will last for years and years to come.